Coffee & tea to-go
Cafés, milk-tea shops, juice bars and ice-cream stores. Hot drinks run mostly 8–16 oz, milk tea and cold drinks 16–24 oz, and bubble tea needs a 12 mm straw.
One cup, start to finish — cup, lid and straw all compliant.
What buyers care about most
Lids that seal
No leaks on the way to the customer — every lid is test-fitted to its cup before an order.
Brand colour that stays the same
The same print colour across every store and every batch.
Straws that pass and last
Allowed in your market, and still firm at the end of the drink.
The recommended kit
Representative sizes. Every item has an OKFoodware item number and English spec sheet.
| Item | Sizes | Material | Notes |
|---|---|---|---|
| Hot cups | Single wall 4 / 8 / 12 / 16 oz · double wall 8–16 oz · ripple 8–16 oz | Food-grade paper + PE / PLA lining | Double and ripple walls insulate, so no sleeve is needed |
| Cold cups | Paper 12–22 oz · clear PLA 9 / 12 / 16 / 20 / 24 oz | Paper / PLA | Use PLA when customers should see the drink — below 45 °C only |
| Lids | 80 / 90 mm: sip, U-shape, fold-back, flip, leak-proof, heart · flat or dome lids for PLA cups | Confirmed per model | Cups and lids from different lines are test-fitted first |
| Sleeves & carriers | 80 / 90 mm ripple sleeves · 1 / 2 / 4-cup carriers | Kraft corrugated board | Sleeves are the lowest-cost place to print your logo |
| Straws | Bubble tea 12 mm angled · coffee and juice 6–8 mm · paper Ø6 × 197 mm | Plant fibre / paper / PLA | Chosen by market — see Swap |
| Stirrers | 116 mm | Wood / CPLA | Wood only for the EU |
| Carry bags | 1, 2 or 4-cup | Kraft paper | Essential for delivery-app orders |
| Ice cream cups | 140–500 ml | Printed paper | Foil and rainbow prints available |
Adjusted for where you sell
The kit changes with the destination. These are the main adjustments; we confirm the details for your order.
Full market guidePE or PLA lined paper cups are allowed but must carry the ‘plastic in product’ marking. Straws: paper and reusable only.
PLA cold cups and plant-fibre straws are both available. Any ‘compostable’ claim is backed by a certificate for that model.
Paper straws first. PLA straws are confirmed before order.
Test it with your own food
Your three best-selling cup sizes, each with matching lid and straw — plus one ripple cup and one sleeve for comparison.
- Print and screen colours can differ by a few percent, so we approve a physical print proof before mass production.
- Two ‘12 oz’ cups can have 80 mm or 90 mm rims. Our quotes state rim diameter and height, not just ounces.
Questions buyers ask about this kit
Tell us where you sell and what you serve.
We'll check the rules for your market, match a kit to your menu and send samples to test with your own food.